|
|
|
Many
of your electronic products are packaged in clear, pink or blue
antistatic polyethylene bags or shrouds made from energy consuming
oil and gas based virgin resins. You can lead the way and reduce
your company’s carbon footprint by using a 40% post consumer green
tinted antistatic polyethylene bag or shroud. There is no difference
in price, physical or electronic properties of the bag. Only the
tinted green color and “Purestat Green Share” embossed on the film
will separate your environmental conscious company from your
competitors. Everyone will appreciate your efforts to help our
planet. |
|
|
PHYSICAL PROPERTIES |
TEST METHOD |
SPECIFICATION |
|
Thickness |
Micrometer |
2-8 mil |
|
Tensile Strength |
ASTM D-882 |
MD>3000 PSI
TD> 3000 PSI |
|
Elongation |
ASTM D-882 |
MD> 800%
TD> 900% |
|
Puncture Resistance |
FTMS 101C method 2065 |
>
12lbs |
|
Tear Strength |
ASTM D-1004 |
65
to 400 lbs per inch |
|
Mullen Burst |
ASTM D-774 |
20
to 60 PSI |
|
Dart Impact |
ASTM D-1709 |
>
200 Grams |
|
C.O.F. .25 - .35 |
ASTM D-1894-90 |
None |
|
Blocking |
Visual |
None |
|
ELECTRICAL
PROPERTIES |
TEST METHOD |
SPECIFICATION |
|
Surface Resistivity |
ASTM D-257 @ 15 RH |
<1012 Ohms/SQ |
|
Electronic Decay |
MIL-PRF-81705D Type II
FTMS 101 method 4046 |
<
2 seconds |
|
Bag Sizes |
Bag
Width – 1” to 80”
Bag
Length – any length |
|
Applications |
For packaging of static
sensitive & non-static sensitive components, where electrostatic
contamination is a problem. Products available: bags, tubing and sheeting
|
|
Recommended Conditions for Heat Sealing
|
Product
is suitable for a variety of automatic bag-making machines
Temperature: 250 -375 degrees F
Time -
.5 – 3.5 seconds
Pressure – 30-70 PSI
|
|
*The values
shown above were developed from random samples taken from production
material we believe to be typical for the product. However, actual values
may vary somewhat from those depicted here and PTI makes no warranty,
expressed or implied as to the suitability of these materials for any
specific use. Customers should determine product suitability based upon
their own initial criteria. Nothing herein is to be taken as a license to
operate under or a recommendation to infringe upon any patent. |
