|
Pure-Stat™
Technologies Inc. High
Electron Flow (HEF)
film meets electrical requirements of MIL-P-82646A. HEF is
made from a single layer of carbon-loaded polyethylene. HEF
conductivity does not depend on humidity. It is non-sloughing,
does not contaminate components it comes in contact with despite
repeated use, and is groundable. PATENT PENDING |
|
VOLUME CONDUCTIVE FILM
HUMIDITY INDEPENDENT TUBULAR PROTECTION |
|
Properties |
| Color - Black Opaque - Printable |
|
| Tensile Strength -
MD>2000 PSI |
ASTM D 882 |
|
Tensile Strength -
TD>1500 PSI |
ASTM D 882 |
| Elongation (MD%) - >MD
200% |
ASTM D 882 |
| Dart Impact -
<300gms TD |
ASTM D 1709 |
|
|
Performance |
| |
|
| Volume Resistivity - <5 OHMS/cm |
ASTM D 991 |
| |
|
| Surface Resistivity - <5 OHMS/Sq. |
ASTM D 257 |
|
|
|
Sizes
|
As specified by our customers. |
|
Heat Sealing |
Product is suitable for
heat sealing machines:
Temperature - 250ºF - 375ºF
Time - 0.5 - 3.5 seconds
Pressure - 30 - 70 PSI |
|
|
Applications |
Medical, Electronics, Battery and Capacitor
Industries
For use where high electron flow is required.
Products
Available - Bags, Tubing, Sheeting. |
|
| *The values in the above table were developed from random samples taken from
production material we believe to be typical for the product. Actual
values, however, may vary somewhat from those depicted here and PTI makes no
warranty, expressed or implied, as to the suitability of these materials for any
specific use. Customers should determine product suitability based upon
their own initial criteria. Nothing herein is to be taken as license to
operate under or a recommendation to infringe upon any patent. |
