|
Pure-Stat™
Technologies Inc. Blac-Stat™
volume conductive film meets electrical requirements of MIL-P-82646A.
Blac-Stat™ is
made from a single layer of carbon-loaded polyethylene.
Blac-Stat's™
conductivity does not depend on humidity. It is non-sloughing,
does not contaminate components it comes in contact with despite
repeated use, and is groundable. |
|
VOLUME CONDUCTIVE FILM
HUMIDITY INDEPENDENT TUBULAR PROTECTION |
|
Properties |
| Color - Black Opaque - Printable |
|
| Tensile Strength - >2000 PSI |
ASTM D 882 |
| Elongation (MD%) - >150% |
ASTM D 882 |
| Dart Impact - 250 to 700 gms |
ASTM D 1709 |
| Tearing Strength - >400 lbs. per inch |
ASTM D 882 |
| Burst (Mullen) - 20 to 60 PSI |
ASTM D 774 |
|
|
Performance |
| Volume Resistivity - <30,000 OHMS/cm |
| Surface Resistivity - <30,000 OHMS/Sq. |
|
ASTM D 991
ASTM D 257 |
|
Sizes
|
As specified by our customers. |
|
Heat Sealing |
Product is suitable for
automatic bag-making machines:
Temperature - 250ºF - 375ºF
Time - 0.5 - 3.5 seconds
Pressure - 30 - 70 PSI |
|
|
Applications |
For packaging of static sensitive components, where electrostatic
contamination is a problem.
Products
Available - Bags, Tubing, Sheeting. |
|
| *The values in the above table were developed from random samples taken from
production material we believe to be typical for the product. Actual
values, however, may vary somewhat from those depicted here and PTI makes no
warranty, expressed or implied, as to the suitability of these materials for any
specific use. Customers should determine product suitability based upon
their own initial criteria. Nothing herein is to be taken as license to
operate under or a recommendation to infringe upon any patent. |
